1
Enquiry
direct order
✓
Quote
3
Jobin progress
4
Invoices
not yet
5
Look after it
—
Next step
Move it to Assembly when the shop gets there
2 BOM line(s) short in stores — check Purchasing.
✓
Released
✓
Plasma cutting
✓
Fabrication
4
Balancing
5
Assembly
6
Test run
7
Ready to dispatch
8
Dispatched
Fan specificationBalancing
- Customer
- Visy Paper — Smithfield · order VP 2209931
- From quote
- FBA-Q4423
- Model
- S101-820 — Series 101 Pressure Blower, 820 mm impeller
- Duty
- 1,100 l/s @ 5,200 Pa static
- Drive
- 15 kW 4-pole WEG W22 · Arr 1 / 4
- Handing
- ACW 0°
- Finish
- Prime coat
- Qty
- 1
- Due
- 12 Oct 2026
Value
Sell (ex GST)$22,040.00 Standard cost$12,565.00 Materials (BOM at stores cost)$5,651.80 Shop hours (est.)32.9 h Margin$9,475 · 43%
Bill of materialsreserved against this works order · 2 line(s) short
| Part | Description | Bin | Qty | On hand | Allocated (all WOs) | Cost | Status |
|---|---|---|---|---|---|---|---|
| BRG-SNL516 | SKF SNL 516 plummer block + 22216 bearing | Store 2-B | 2 ea | 12 | 14 | $692 | Part short |
| PUL-SPB | Taper-lock pulley SPB + bush | Store 2-C | 2 ea | 33 | 20 | $264 | In stock |
| VB-SPB | V-belt SPB wedge | Store 2-D | 3 ea | 69 | 34 | $84 | In stock |
| FAST-KIT | Fastener kit — HT bolts, nuts, washers | Store 1-A | 1 kit | 50 | 26 | $34 | In stock |
| GRD-BELT | Belt & shaft guard (mesh) | Rack D3 | 1 ea | 39 | 23 | $94 | In stock |
| GRD-INLET | Inlet guard (mesh) | Rack D3 | 1 ea | 52 | 34 | $56 | In stock |
| CONE-SW | Spun inlet cone — single inlet | Rack D1 | 1 ea | 25 | 18 | $168 | In stock |
| MOT-15 | WEG W22 IE3 15 kW 4-pole TEFC | Motor bay 1 | 1 ea | 5 | 3 | $2,325 | In stock |
| AVM-SET | Anti-vibration mount set (4) | Store 2-E | 1 set | 36 | 26 | $118 | In stock |
| PNT-PRM | Zinc phosphate primer | Paint store | 3 L | 125 | 82 | $50 | In stock |
| SH-65 | EN8 shaft bar Ø65 | Rack C2 | 1.7 m | 10.2 | 11.7 | $202 | Part short |
| PL-3 | HR plate 3mm 2400×1200 | Rack A1 | 2 sheet | 72 | 45 | $296 | In stock |
| PL-8 | HR plate 8mm 2400×1200 | Rack A4 | 3 sheet | 20 | 9 | $1,176 | In stock |
| CH-100 | PFC channel 100×50 — 1m | Rack B1 | 3 m | 124 | 67 | $93 | In stock |
Fan & Blower Company of Australia Pty Ltd
Cnr Macarthur & Fennell Sts, Parramatta NSW 2150 · (02) 9630 5100 · sales@fanblower.com.au
ABN 17 000 617 245
Works order
WO-26107
Works order WO-26107
Date 07 Sep 2026
Customer order VP 2209931
Customer
Visy Paper — Smithfield
Smithfield NSW
| Model | S101-820 — Series 101 Pressure Blower 820 radial tip |
| Quantity | 1 |
| Duty | 1,100 l/s @ 5,200 Pa static |
| Motor | 15 kW 4-pole TEFC IE3 |
| Arrangement / handing | Arr 1 / 4 · ACW 0° |
| Finish | Prime coat |
| Serial | issued at test run |
Shop copy — plasma cut, fabricate, balance, assemble, test run.
A member of the Harvey group of companies · Established 1895
Emails & activity · 5
↗ Re: Quotation FBA-Q4423 — Pressure blower — pulper FBA synced 12 Sep 2026 · 16:29
From Debbie Zilioli <dzilioli@fanblower.com.au> · To Ali Hamdan <ali@visy.com.au>
Thanks Ali — appreciated. We'll release it to the factory and send an order acknowledgement with the due date.
Debbie Zilioli↙ Re: Quotation FBA-Q4423 — Pressure blower — pulper FBA synced 12 Sep 2026 · 11:20
From Ali Hamdan <ali@visy.com.au> · To Debbie Zilioli <dzilioli@fanblower.com.au>
Hi Debbie,
Approved — please proceed. Our order number to follow.
Thanks,
Ali Hamdan↗ Quotation FBA-Q4423 — Pressure blower — pulper FBA sent 08 Sep 2026 · 17:24
From Debbie Zilioli <dzilioli@fanblower.com.au> · To Ali Hamdan <ali@visy.com.au>
Hi Ali,
Please find attached our quotation FBA-Q4423 for Pressure blower — pulper — $22,560 + GST, valid 30 days.
Happy to walk through it.
Regards,
Debbie Zilioli↗ Order acknowledgement WO-26107 — your order VP 2209931 FBA sent 07 Sep 2026 · 14:04
From Debbie Zilioli <dzilioli@fanblower.com.au> · To Ali Hamdan <ali@visy.com.au>
Hi Ali,
Thanks for your order. Works order WO-26107 has been released to the factory — 1 × S101-820, 15 kW, handing ACW 0°. Due ex-works 12/10/2026.
Debbie Zilioli
Fan & Blower Australia↙ Purchase order VP 2209931 — S101-820 FBA synced 07 Sep 2026 · 10:01
From Ali Hamdan <ali@visy.com.au> · To Debbie Zilioli <dzilioli@fanblower.com.au>
Hi Debbie,
Please find our order VP 2209931 attached for 1 × S101-820, 1,100 l/s @ 5200 Pa, prime coat. Please confirm the delivery date.
Ali Hamdan