1
Enquiry
direct order
2
Quote
no quote
3
Jobin progress
4
Invoices
not yet
5
Look after it
—
Next step
Move it to Balancing when the shop gets there
2 BOM line(s) short in stores — check Purchasing.
✓
Released
✓
Plasma cutting
3
Fabrication
4
Balancing
5
Assembly
6
Test run
7
Ready to dispatch
8
Dispatched
Fan specificationFabrication
- Customer
- Boral Cement — Berrima · order BCB-118204
- Model
- MEX-800 — Mill Exhaust, 800 mm impeller
- Duty
- 6,400 l/s @ 1,800 Pa static
- Drive
- 30 kW 4-pole WEG W22 · Arr 1
- Handing
- CW 270°
- Finish
- Prime coat
- Qty
- 1
- Due
- 16 Oct 2026
Value
Sell (ex GST)$22,980.00 Standard cost$13,319.00 Materials (BOM at stores cost)$8,001.80 Shop hours (est.)34.6 h Margin$9,661 · 42%
Bill of materialsreserved against this works order · 2 line(s) short
| Part | Description | Bin | Qty | On hand | Allocated (all WOs) | Cost | Status |
|---|---|---|---|---|---|---|---|
| BRG-SNL516 | SKF SNL 516 plummer block + 22216 bearing | Store 2-B | 2 ea | 12 | 14 | $692 | Part short |
| PUL-SPB | Taper-lock pulley SPB + bush | Store 2-C | 2 ea | 33 | 20 | $264 | In stock |
| VB-SPB | V-belt SPB wedge | Store 2-D | 3 ea | 69 | 34 | $84 | In stock |
| FAST-KIT | Fastener kit — HT bolts, nuts, washers | Store 1-A | 1 kit | 50 | 26 | $34 | In stock |
| GRD-BELT | Belt & shaft guard (mesh) | Rack D3 | 1 ea | 39 | 23 | $94 | In stock |
| GRD-INLET | Inlet guard (mesh) | Rack D3 | 1 ea | 52 | 34 | $56 | In stock |
| CONE-SW | Spun inlet cone — single inlet | Rack D1 | 1 ea | 25 | 18 | $168 | In stock |
| MOT-30 | WEG W22 IE3 30 kW 4-pole TEFC | Motor bay 2 | 1 ea | 4 | 3 | $4,675 | In stock |
| AVM-SET | Anti-vibration mount set (4) | Store 2-E | 1 set | 36 | 26 | $118 | In stock |
| PNT-PRM | Zinc phosphate primer | Paint store | 3 L | 125 | 82 | $50 | In stock |
| SH-65 | EN8 shaft bar Ø65 | Rack C2 | 1.7 m | 10.2 | 11.7 | $202 | Part short |
| PL-3 | HR plate 3mm 2400×1200 | Rack A1 | 2 sheet | 72 | 45 | $296 | In stock |
| PL-8 | HR plate 8mm 2400×1200 | Rack A4 | 3 sheet | 20 | 9 | $1,176 | In stock |
| CH-100 | PFC channel 100×50 — 1m | Rack B1 | 3 m | 124 | 67 | $93 | In stock |
Fan & Blower Company of Australia Pty Ltd
Cnr Macarthur & Fennell Sts, Parramatta NSW 2150 · (02) 9630 5100 · sales@fanblower.com.au
ABN 17 000 617 245
Works order
WO-26106
Works order WO-26106
Date 20 Sep 2026
Customer order BCB-118204
Customer
Boral Cement — Berrima
New Berrima NSW
| Model | MEX-800 — Mill Exhaust 800 paddle wheel |
| Quantity | 1 |
| Duty | 6,400 l/s @ 1,800 Pa static |
| Motor | 30 kW 4-pole TEFC IE3 |
| Arrangement / handing | Arr 1 · CW 270° |
| Finish | Prime coat |
| Serial | issued at test run |
Shop copy — plasma cut, fabricate, balance, assemble, test run.
A member of the Harvey group of companies · Established 1895
Emails & activity · 2
↗ Order acknowledgement WO-26106 — your order BCB-118204 FBA sent 20 Sep 2026 · 15:12
From Debbie Zilioli <dzilioli@fanblower.com.au> · To Shane Rudd <shane@boral.com.au>
Hi Shane,
Thanks for your order. Works order WO-26106 has been released to the factory — 1 × MEX-800, 30 kW, handing CW 270°. Due ex-works 16/10/2026.
Debbie Zilioli
Fan & Blower Australia↙ Purchase order BCB-118204 — MEX-800 FBA synced 20 Sep 2026 · 08:08
From Shane Rudd <shane@boral.com.au> · To Debbie Zilioli <dzilioli@fanblower.com.au>
Hi Debbie,
Please find our order BCB-118204 attached for 1 × MEX-800, 6,400 l/s @ 1800 Pa, prime coat. Please confirm the delivery date.
Shane Rudd