1
Enquiry
direct order
2
Quote
no quote
3
Jobin progress
4
Invoices
not yet
5
Look after it
—
Next step
Move it to Fabrication when the shop gets there
All materials reserved and in stores.
✓
Released
2
Plasma cutting
3
Fabrication
4
Balancing
5
Assembly
6
Test run
7
Ready to dispatch
8
Dispatched
Fan specificationUrgentPlasma cutting
- Customer
- Sell & Parker · order SP-PO-30418
- Model
- TRT-1120 — Turbovane Radial Tip, 1120 mm impeller
- Duty
- 14,500 l/s @ 2,200 Pa static
- Drive
- 55 kW 4-pole WEG W22 · Arr 1
- Handing
- CW 270°
- Finish
- Hot dip galvanised
- Qty
- 1
- Due
- 26 Oct 2026
Value
Sell (ex GST)$54,972.00 Standard cost$29,366.00 Materials (BOM at stores cost)$13,793.50 Shop hours (est.)67.8 h Margin$25,606 · 47%
Bill of materialsreserved against this works order
| Part | Description | Bin | Qty | On hand | Allocated (all WOs) | Cost | Status |
|---|---|---|---|---|---|---|---|
| BRG-SNL518 | SKF SNL 518 plummer block + 22218 bearing | Store 2-B | 2 ea | 13 | 10 | $936 | In stock |
| PUL-SPB | Taper-lock pulley SPB + bush | Store 2-C | 2 ea | 33 | 20 | $264 | In stock |
| VB-SPB | V-belt SPB wedge | Store 2-D | 4 ea | 69 | 34 | $112 | In stock |
| FAST-KIT | Fastener kit — HT bolts, nuts, washers | Store 1-A | 1 kit | 50 | 26 | $34 | In stock |
| GRD-BELT | Belt & shaft guard (mesh) | Rack D3 | 1 ea | 39 | 23 | $94 | In stock |
| GRD-INLET | Inlet guard (mesh) | Rack D3 | 1 ea | 52 | 34 | $56 | In stock |
| CONE-SW | Spun inlet cone — single inlet | Rack D1 | 1 ea | 25 | 18 | $168 | In stock |
| MOT-55 | WEG W22 IE3 55 kW 4-pole TEFC | Motor bay 2 | 1 ea | 2 | 1 | $8,934 | In stock |
| AVM-SET | Anti-vibration mount set (4) | Store 2-E | 1 set | 36 | 26 | $118 | In stock |
| SVC-HDG | Hot dip galvanising (per 100 kg) | — | 1.5 100kg | — | — | $248 | Outwork |
| PNT-PRM | Zinc phosphate primer | Paint store | 4 L | 125 | 82 | $66 | In stock |
| SH-80 | EN8 shaft bar Ø80 | Rack C2 | 2 m | 16 | 10.2 | $352 | In stock |
| PL-10 | HR plate 10mm 2400×1200 | Rack A5 | 4 sheet | 24 | 12 | $1,992 | In stock |
| PL-3 | HR plate 3mm 2400×1200 | Rack A1 | 2 sheet | 72 | 45 | $296 | In stock |
| CH-100 | PFC channel 100×50 — 1m | Rack B1 | 4 m | 124 | 67 | $124 | In stock |
Fan & Blower Company of Australia Pty Ltd
Cnr Macarthur & Fennell Sts, Parramatta NSW 2150 · (02) 9630 5100 · sales@fanblower.com.au
ABN 17 000 617 245
Works order
WO-26103
Works order WO-26103
Date 20 Sep 2026
Customer order SP-PO-30418
Customer
Sell & Parker
Blacktown NSW
| Model | TRT-1120 — Turbovane Radial Tip 1120 radial tip |
| Quantity | 1 |
| Duty | 14,500 l/s @ 2,200 Pa static |
| Motor | 55 kW 4-pole TEFC IE3 |
| Arrangement / handing | Arr 1 · CW 270° |
| Finish | Hot dip galvanised |
| Serial | issued at test run |
Shop copy — plasma cut, fabricate, balance, assemble, test run.
A member of the Harvey group of companies · Established 1895
Emails & activity · 3
☎ Call: chasing WO-26103 FBA 03 Oct 2026 · 08:35
Ron Mikhail called chasing progress — plant shutdown is booked. Told them plasma cutting now, due 26/10/2026. David to update Friday.
↗ Order acknowledgement WO-26103 — your order SP-PO-30418 FBA sent 20 Sep 2026 · 15:18
From Debbie Zilioli <dzilioli@fanblower.com.au> · To Ron Mikhail <ron@sellparker.com.au>
Hi Ron,
Thanks for your order. Works order WO-26103 has been released to the factory — 1 × TRT-1120, 55 kW, handing CW 270°. Due ex-works 26/10/2026.
Debbie Zilioli
Fan & Blower Australia↙ Purchase order SP-PO-30418 — TRT-1120 FBA synced 20 Sep 2026 · 08:12
From Ron Mikhail <ron@sellparker.com.au> · To Debbie Zilioli <dzilioli@fanblower.com.au>
Hi Debbie,
Please find our order SP-PO-30418 attached for 1 × TRT-1120, 14,500 l/s @ 2200 Pa, hot dip galvanised. Please confirm the delivery date.
Ron Mikhail