1
Enquiry
direct order
2
Quote
no quote
3
Jobin progress
4
Invoices
not yet
5
Look after it
—
Next step
Move it to Plasma cutting when the shop gets there
1 BOM line(s) short in stores — check Purchasing.
1
Released
2
Plasma cutting
3
Fabrication
4
Balancing
5
Assembly
6
Test run
7
Ready to dispatch
8
Dispatched
Fan specificationReleased
- Customer
- A.G. Coombs · order 4500128834
- Model
- S1000-DWDI-630 — Series 1000 DWDI, 630 mm impeller
- Duty
- 7,800 l/s @ 650 Pa static
- Drive
- 7.5 kW 4-pole WEG W22 · Arr 3
- Handing
- CW 270°
- Finish
- Prime coat
- Qty
- 2
- Due
- 02 Nov 2026
Value
Sell (ex GST)$31,940.00 Standard cost$18,120.00 Materials (BOM at stores cost)$7,209.00 Shop hours (est.)56 h Margin$13,820 · 43%
Bill of materialsreserved against this works order · 1 line(s) short
| Part | Description | Bin | Qty | On hand | Allocated (all WOs) | Cost | Status |
|---|---|---|---|---|---|---|---|
| BRG-SNL513 | SKF SNL 513 plummer block + 22213 bearing | Store 2-B | 4 ea | 30 | 22 | $952 | In stock |
| PUL-SPA | Taper-lock pulley SPA + bush | Store 2-C | 4 ea | 45 | 26 | $344 | In stock |
| VB-SPA | V-belt SPA wedge | Store 2-D | 4 ea | 72 | 26 | $76 | In stock |
| FAST-KIT | Fastener kit — HT bolts, nuts, washers | Store 1-A | 2 kit | 50 | 26 | $68 | In stock |
| GRD-BELT | Belt & shaft guard (mesh) | Rack D3 | 2 ea | 39 | 23 | $188 | In stock |
| GRD-INLET | Inlet guard (mesh) | Rack D3 | 4 ea | 52 | 34 | $224 | In stock |
| CONE-DW | Spun inlet cone pair — DWDI | Rack D1 | 4 ea | 9 | 10 | $632 | Part short |
| MOT-7.5 | WEG W22 IE3 7.5 kW 4-pole TEFC | Motor bay 1 | 2 ea | 8 | 5 | $2,468 | In stock |
| AVM-SET | Anti-vibration mount set (4) | Store 2-E | 2 set | 36 | 26 | $236 | In stock |
| PNT-PRM | Zinc phosphate primer | Paint store | 6 L | 125 | 82 | $99 | In stock |
| SH-50 | EN8 shaft bar Ø50 | Rack C1 | 3 m | 31 | 21 | $222 | In stock |
| PL-3 | HR plate 3mm 2400×1200 | Rack A1 | 4 sheet | 72 | 45 | $592 | In stock |
| PL-5 | HR plate 5mm 2400×1200 | Rack A2 | 4 sheet | 44 | 26 | $984 | In stock |
| CH-100 | PFC channel 100×50 — 1m | Rack B1 | 4 m | 124 | 67 | $124 | In stock |
Fan & Blower Company of Australia Pty Ltd
Cnr Macarthur & Fennell Sts, Parramatta NSW 2150 · (02) 9630 5100 · sales@fanblower.com.au
ABN 17 000 617 245
Works order
WO-26102
Works order WO-26102
Date 25 Sep 2026
Customer order 4500128834
Customer
A.G. Coombs
Mascot NSW
| Model | S1000-DWDI-630 — Series 1000 DWDI 630 aerofoil |
| Quantity | 2 |
| Duty | 7,800 l/s @ 650 Pa static |
| Motor | 7.5 kW 4-pole TEFC IE3 |
| Arrangement / handing | Arr 3 · CW 270° |
| Finish | Prime coat |
| Serial | issued at test run |
Shop copy — plasma cut, fabricate, balance, assemble, test run.
A member of the Harvey group of companies · Established 1895
Emails & activity · 2
↗ Order acknowledgement WO-26102 — your order 4500128834 FBA sent 25 Sep 2026 · 15:15
From Debbie Zilioli <dzilioli@fanblower.com.au> · To Lachlan Pyke <lachlan@agcoombs.com.au>
Hi Lachlan,
Thanks for your order. Works order WO-26102 has been released to the factory — 2 × S1000-DWDI-630, 7.5 kW, handing CW 270°. Due ex-works 02/11/2026.
Debbie Zilioli
Fan & Blower Australia↙ Purchase order 4500128834 — S1000-DWDI-630 FBA synced 25 Sep 2026 · 08:17
From Lachlan Pyke <lachlan@agcoombs.com.au> · To Debbie Zilioli <dzilioli@fanblower.com.au>
Hi Debbie,
Please find our order 4500128834 attached for 2 × S1000-DWDI-630, 7,800 l/s @ 650 Pa, prime coat. Please confirm the delivery date.
Lachlan Pyke