1
Enquiry
direct order
2
Quote
no quote
3
Jobin progress
4
Invoices
not yet
5
Look after it
—
Next step
Move it to Plasma cutting when the shop gets there
3 BOM line(s) short in stores — check Purchasing.
1
Released
2
Plasma cutting
3
Fabrication
4
Balancing
5
Assembly
6
Test run
7
Ready to dispatch
8
Dispatched
Fan specificationReleased
- Customer
- Fredon Air · order PO 77812
- Model
- S1000-SWSI-800-AL — Series 1000 SWSI, 800 mm impeller
- Duty
- 9,200 l/s @ 850 Pa static
- Drive
- 15 kW 4-pole WEG W22 · Arr 1 / 9
- Handing
- CW 0°
- Finish
- Prime coat
- Qty
- 1
- Due
- 27 Oct 2026
Value
Sell (ex GST)$18,320.00 Standard cost$10,481.00 Materials (BOM at stores cost)$5,063.80 Shop hours (est.)29.3 h Margin$7,839 · 43%
Bill of materialsreserved against this works order · 3 line(s) short
| Part | Description | Bin | Qty | On hand | Allocated (all WOs) | Cost | Status |
|---|---|---|---|---|---|---|---|
| BRG-SNL516 | SKF SNL 516 plummer block + 22216 bearing | Store 2-B | 2 ea | 12 | 14 | $692 | Part short |
| PUL-SPB | Taper-lock pulley SPB + bush | Store 2-C | 2 ea | 33 | 20 | $264 | In stock |
| VB-SPB | V-belt SPB wedge | Store 2-D | 3 ea | 69 | 34 | $84 | In stock |
| FAST-KIT | Fastener kit — HT bolts, nuts, washers | Store 1-A | 1 kit | 50 | 26 | $34 | In stock |
| GRD-BELT | Belt & shaft guard (mesh) | Rack D3 | 1 ea | 39 | 23 | $94 | In stock |
| GRD-INLET | Inlet guard (mesh) | Rack D3 | 1 ea | 52 | 34 | $56 | In stock |
| CONE-SW | Spun inlet cone — single inlet | Rack D1 | 1 ea | 25 | 18 | $168 | In stock |
| MOT-15 | WEG W22 IE3 15 kW 4-pole TEFC | Motor bay 1 | 1 ea | 5 | 3 | $2,325 | In stock |
| AVM-SET | Anti-vibration mount set (4) | Store 2-E | 1 set | 36 | 26 | $118 | In stock |
| PNT-PRM | Zinc phosphate primer | Paint store | 3 L | 125 | 82 | $50 | In stock |
| SH-65 | EN8 shaft bar Ø65 | Rack C2 | 1.7 m | 10.2 | 11.7 | $202 | Part short |
| PL-3 | HR plate 3mm 2400×1200 | Rack A1 | 2 sheet | 72 | 45 | $296 | In stock |
| PL-6 | HR plate 6mm 2400×1200 | Rack A3 | 2 sheet | 8 | 11 | $588 | Part short |
| CH-100 | PFC channel 100×50 — 1m | Rack B1 | 3 m | 124 | 67 | $93 | In stock |
Fan & Blower Company of Australia Pty Ltd
Cnr Macarthur & Fennell Sts, Parramatta NSW 2150 · (02) 9630 5100 · sales@fanblower.com.au
ABN 17 000 617 245
Works order
WO-26101
Works order WO-26101
Date 18 Sep 2026
Customer order PO 77812
Customer
Fredon Air
Wetherill Park NSW
| Model | S1000-SWSI-800-AL — Series 1000 SWSI 800 aerofoil |
| Quantity | 1 |
| Duty | 9,200 l/s @ 850 Pa static |
| Motor | 15 kW 4-pole TEFC IE3 |
| Arrangement / handing | Arr 1 / 9 · CW 0° |
| Finish | Prime coat |
| Serial | issued at test run |
Shop copy — plasma cut, fabricate, balance, assemble, test run.
A member of the Harvey group of companies · Established 1895
Emails & activity · 2
↗ Order acknowledgement WO-26101 — your order PO 77812 FBA sent 18 Sep 2026 · 14:48
From Debbie Zilioli <dzilioli@fanblower.com.au> · To Dean Sorbello <dean@fredon.com.au>
Hi Dean,
Thanks for your order. Works order WO-26101 has been released to the factory — 1 × S1000-SWSI-800-AL, 15 kW, handing CW 0°. Due ex-works 27/10/2026.
Debbie Zilioli
Fan & Blower Australia↙ Purchase order PO 77812 — S1000-SWSI-800-AL FBA synced 18 Sep 2026 · 10:17
From Dean Sorbello <dean@fredon.com.au> · To Debbie Zilioli <dzilioli@fanblower.com.au>
Hi Debbie,
Please find our order PO 77812 attached for 1 × S1000-SWSI-800-AL, 9,200 l/s @ 850 Pa, prime coat. Please confirm the delivery date.
Dean Sorbello