✓
Released
✓
Plasma cutting
✓
Fabrication
✓
Balancing
✓
Assembly
✓
Test run
7
Ready to dispatch
8
Dispatched
Fan specificationReady to dispatch
- Customer
- Goodman Fielder — Erskine Park · order GF-ERS-77102
- Model
- MEX-630 — Mill Exhaust, 630 mm impeller
- Duty
- 3,900 l/s @ 1,600 Pa static
- Drive
- 15 kW 4-pole WEG W22 · Arr 1
- Handing
- CW 90°
- Finish
- Prime coat
- Qty
- 1
- Due
- 05 Oct 2026
- Serial
- FBA-26-0406
Value
Sell (ex GST)$14,530.00 Standard cost$8,359.00 Materials (BOM at stores cost)$5,313.50 Shop hours (est.)26 h Margin$6,171 · 42%
Bill of materialsreserved against this works order
| Part | Description | Bin | Qty | On hand | Allocated (all WOs) | Cost | Status |
|---|---|---|---|---|---|---|---|
| BRG-SNL513 | SKF SNL 513 plummer block + 22213 bearing | Store 2-B | 2 ea | 30 | 22 | $476 | In stock |
| PUL-SPB | Taper-lock pulley SPB + bush | Store 2-C | 2 ea | 33 | 20 | $264 | In stock |
| VB-SPB | V-belt SPB wedge | Store 2-D | 3 ea | 69 | 34 | $84 | In stock |
| FAST-KIT | Fastener kit — HT bolts, nuts, washers | Store 1-A | 1 kit | 50 | 26 | $34 | In stock |
| GRD-BELT | Belt & shaft guard (mesh) | Rack D3 | 1 ea | 39 | 23 | $94 | In stock |
| GRD-INLET | Inlet guard (mesh) | Rack D3 | 1 ea | 52 | 34 | $56 | In stock |
| CONE-SW | Spun inlet cone — single inlet | Rack D1 | 1 ea | 25 | 18 | $168 | In stock |
| MOT-15 | WEG W22 IE3 15 kW 4-pole TEFC | Motor bay 1 | 1 ea | 5 | 3 | $2,325 | In stock |
| AVM-SET | Anti-vibration mount set (4) | Store 2-E | 1 set | 36 | 26 | $118 | In stock |
| PNT-PRM | Zinc phosphate primer | Paint store | 3 L | 125 | 82 | $50 | In stock |
| SH-50 | EN8 shaft bar Ø50 | Rack C1 | 1.5 m | 31 | 21 | $111 | In stock |
| PL-3 | HR plate 3mm 2400×1200 | Rack A1 | 2 sheet | 72 | 45 | $296 | In stock |
| PL-8 | HR plate 8mm 2400×1200 | Rack A4 | 3 sheet | 20 | 9 | $1,176 | In stock |
| CH-100 | PFC channel 100×50 — 1m | Rack B1 | 2 m | 124 | 67 | $62 | In stock |
Fan & Blower Company of Australia Pty Ltd
Cnr Macarthur & Fennell Sts, Parramatta NSW 2150 · (02) 9630 5100 · sales@fanblower.com.au
ABN 17 000 617 245
Test certificate
FBA-26-0406
Works order WO-26114
Date 02 Oct 2026
Customer order GF-ERS-77102
Customer
Goodman Fielder — Erskine Park
Erskine Park NSW
| Model | MEX-630 — Mill Exhaust 630 paddle wheel |
| Quantity | 1 |
| Duty | 3,900 l/s @ 1,600 Pa static |
| Motor | 15 kW 4-pole TEFC IE3 |
| Arrangement / handing | Arr 1 · CW 90° |
| Finish | Prime coat |
| Serial | FBA-26-0406 |
Test run results — Pass
Test speed
1345 rpmBalance grade
G2.5Vibration (bearing housing)
1.9 mm/s RMSMotor current
28.5 ASound @ 1 m
86 dB(A)Tested by
Mick Henderson · 02 Oct 2026Fan test-run at our Parramatta works. Impeller statically and dynamically balanced on our hard-bearing balancing machine.
A member of the Harvey group of companies · Established 1895
Emails & activity · 2
↗ Order acknowledgement WO-26114 — your order GF-ERS-77102 FBA sent 10 Sep 2026 · 13:07
From Debbie Zilioli <dzilioli@fanblower.com.au> · To Brett Hollis <brett@goodmanfielder.com>
Hi Brett,
Thanks for your order. Works order WO-26114 has been released to the factory — 1 × MEX-630, 15 kW, handing CW 90°. Due ex-works 05/10/2026.
Debbie Zilioli
Fan & Blower Australia↙ Purchase order GF-ERS-77102 — MEX-630 FBA synced 10 Sep 2026 · 09:00
From Brett Hollis <brett@goodmanfielder.com> · To Debbie Zilioli <dzilioli@fanblower.com.au>
Hi Debbie,
Please find our order GF-ERS-77102 attached for 1 × MEX-630, 3,900 l/s @ 1600 Pa, prime coat. Please confirm the delivery date.
Brett Hollis